Halo Track Lighting L80825NF9030MB 4x22 LED Single Circuit Cylinder Track Fixture - 2500 Lumens, Narrow Flood 90 CRI, 3000K, 120V

Description

Heat Sink - Aluminum die-cast heat sink provides thermal management to yield 70% lumen maintenance after 50,000 hours of operation. High efficacy low profile track fixture ideal for accent and display lighting applications. 4" fixtures (35W) contain 120V 50/60Hz constant current driver that provides noise free operation.CompliancecULus listed / certified for use with Halo Single Circuit Power- Trac and Global TEK/HTEK track(See Footnote #1 below Ordering. By Halo Lighting. Available in 90 CRI minimum, R9 greater than 50 and color accuracy within 3 SDCM provide color accuracy and uniformity.OpticsConfigurable optics allow for the reflectors to be changed in the field to adjust to the current lighting need. (Dimmers with low end trim adjustment offer greater assurance of achieving 5% level.) - Drivers3" fixtures (12W and 21W) contain integral 120V, 50/60 Hz constant current driver that provides noise free operation. Includes discrete locking tab that locks the luminaire on the track and allows for easy removal and repositioning. Includes discrete locking tab that locks the luminaire on the track and allows for easy removal and repositioning. - Heat Sink - Aluminum die-cast heat sink provides thermal management to yield 70% lumen maintenance after 50,000 hours of. LED Light Engine - Chip on board LED provides a uniform source with high efficiency and no pixilation. Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11. NSF non-food zone compliant.

Key Features

• This enables a clean look while providing full aiming capabilities. - Dimming TRIAC, ELV or Phasecut - Designed for continuous dimming capability to nominally 5% with many 120V Leading Edge (LE) and Trailing Edge (TE) Phase Control Dimmers.
• 4" fixtures (35W) contain 120V 50/60Hz constant current driver that provides noise free operation.CompliancecULus listed / certified for use with Halo Single Circuit Power- Trac and Global TEK/HTEK track(See Footnote #1 below Ordering.
• Includes discrete locking tab that locks the luminaire on the track and allows for easy removal and repositioning.
• Includes discrete locking tab that locks the luminaire on the track and allows for easy removal and repositioning. - Heat Sink - Aluminum die-cast heat sink provides thermal management to yield 70% lumen maintenance after 50,000 hours of.
• Heat Sink - Aluminum die-cast heat sink provides thermal management to yield 70% lumen maintenance after 50,000 hours of operation.
• (Dimmers with low end trim adjustment offer greater assurance of achieving 5% level.) - Drivers3" fixtures (12W and 21W) contain integral 120V, 50/60 Hz constant current driver that provides noise free operation.