Rule Mate 2000 GPH Fully Automated Bilge Pump - 24V

Description

The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller reducing the remaining water to approximately 5/8". Once the debris is removed the pump will revert to its normal operation turning on when the water reaches 2-1/2" and shutting off at 5/8". If debris fouls the sensor or the pump becomes air-bound the pump will stop running and begin to "check" for water every 2-1/2 minutes. Rule-Mate Intelligence Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. Rule-Mate Intelligence Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel especially the vessels batteries. Rule-Mate 2000 GPH 24 Volt Fully Automated Bilge Pump The Rule-Mate 2000 GPH pump consists of a powerful Rule bilge pump and a highly intelligent circuit board in a single housing. This is a very unique feature to bilge pumps because it protects the pump and the vessel especially the vessels batteries.

Key Features

• If debris fouls the sensor or the pump becomes air-bound the pump will stop running and begin to "check" for water every 2-1/2 minutes.
• This is a very unique feature to bilge pumps because it protects the pump and the vessel especially the vessels batteries.
• Once the debris is removed the pump will revert to its normal operation turning on when the water reaches 2-1/2" and shutting off at 5/8".
• Rule-Mate 2000 GPH 24 Volt Fully Automated Bilge Pump The Rule-Mate 2000 GPH pump consists of a powerful Rule bilge pump and a highly intelligent circuit board in a single housing.
• The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller reducing the remaining water to approximately 5/8".
• Rule-Mate Intelligence Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water.